Hot Water But No Heating in Kent

If your taps are running hot but your radiators stay cold, you’re not alone. This is a common issue in Orpington, Dartford, Bexley, and nearby towns — especially when older boilers struggle to keep up with winter demand. In this guide, DAKS Plumbing explains why hot water but no heating in Kent happens, what you can check, and when to call our heating engineers in Kent for fast, expert help.

Main Causes of Hot Water But No Heating in Kent

When your boiler provides hot water but fails to heat radiators, one or more components are likely malfunctioning. Here are the most common reasons this happens in Kent homes.

1. Incorrect Thermostat Settings

Ensure your thermostat is calling for heat and set above room temperature. Flat batteries or lost wireless pairing are frequent causes. If you’re upgrading, consider a smart thermostat for efficiency and control.

2. Faulty Diverter Valve

In combi systems, a diverter valve directs heat between taps and radiators. A jammed valve can leave you with hot water only. This repair must be handled by a Gas Safe registered engineer. Our local team in Kent can replace it swiftly.

Checks Before Calling an Engineer

3. Boiler Pressure

Your boiler’s pressure should read about 1.2 bar. If it’s low, top up via the filling loop or contact our plumbing experts in Dartford for safe assistance.

4. Programmer or Timer Settings

After power cuts or clock changes, timers can lose schedule. Confirm your heating program is active and aligned with your routine.

Radiator and Circulation Issues

5. Air in the System

If radiators are warm at the bottom but cold on top, trapped air is blocking flow. Bleed them using a radiator key, or book a plumbing inspection for professional help.

6. Sludge or Blockages

Rust and debris, known as sludge, can clog your system. A professional power flush clears it and restores even heat. We also handle drainage blockages in Kent.

7. Circulation Pump or Motorised Valve Faults

A failed pump stops hot water reaching radiators. Humming or grinding noises from the boiler are warning signs. Our engineers provide fast central-heating repairs across Kent.

When to Call DAKS Plumbing

• Persistent heating or radiator issues
• Boiler error codes or lockouts
• Suspected faulty components
• Leaks, damp, or unusual noises
• Annual service overdue

Our Gas Safe registered engineers offer diagnostics, servicing, and repairs for all major boiler brands throughout Kent.

Prevent Future “Hot Water But No Heating in Kent” Problems

• Book annual boiler servicing
• Bleed radiators regularly
• Monitor boiler pressure monthly
• Power-flush every 5 years to prevent sludge
• Update timers with seasonal changes

Areas We Cover

We cover Orpington, Swanley, Dartford, Bexley, Sidcup, Gravesend, Wilmington, Hextable, West Kingsdown, Eynsford, Farningham, and Crockenhill — and all nearby Kent towns.

Get Help Today — Fast, Local Heating Engineers

No heating? Don’t panic. DAKS Plumbing provides rapid-response heating repairs across Kent. Whether it’s a boiler fault or circulation issue, we’ll get your home warm again.

📞 Contact DAKS Plumbing for Hot Water But No Heating Repairs in Kent